 |
|
|
Nitriflex to DIN 18541 specification
The material for our Nitriflex waterstops to DIN 18541 is manufactured from high-grade base materials and thus has very high reserves which go in part beyond the requirements of the DIN standard.
Nitriflex waterstops to DIN 18541 specifications are characterized by maximum breaking elongation, outstanding resistance to chemicals and ageing, and permanent elasticity akin to that of rubber.
Joints of all kinds are produced fast and economically with the thermoplastic jointing technique, using standard equipment. (Because of better heat conductivity of Nitriflex waterstops, axe-shaped welding tools with a power of less than 300 W should not be used.)
Nitriflex waterstops to DIN 18541 specifications are available in all major profile shapes and are thus suitable for structures of all kinds with the most stringent requirements.
Material properties:
|
Material property |
Value |
Test method |
|---|---|---|
|
Shore-Hardness A |
67 +/- 5 Grad |
ISO 868 |
|
Density |
1,25 +/- 0,02 g/cm3 |
ISO R 1183 |
|
Tensile strength |
>= 10 N/mm2 |
ISO R 527-2 |
|
Elongation at break |
>= 350 % |
ISO R 527-2 |
|
Elongation at break at 23° C |
>= 350 % |
DIN 53504 |
|
Resistance to tearing |
>= 14 N/mm2 |
DIN 53504 |
|
Linear tolerance |
+/- 0,7 % |
DIN 16941 |
|
Linear expansion coefficient |
15 - 17 x 10-5 K-1 |
DIN 53752 |
|
Fire resistance |
B 2 |
|
The material is free of lead, cadmium, formaldehyd and suitable for exterior use.
- oxygen resistant
- oil and bitumen resistant
- alkali and acids resistant
- non-ageing
- microbe resistant
- UV-resistant
- permanently elastic
All waterstops made from Nitriflex are manufactured with a tolerance according to DIN 18541.
The quality of the material is supervised by the MPA Dortmund